All-Over Cable Mittens

I've had several requests for the pattern for these mittens that I made recently, so here it is!  This is a pretty basic mitten pattern and is a good way to practice doing cables.  I could have condensed the directions somewhat, but I like to be able to check off the rows as I go so each row is written out separately.  That way, if you have to set the work down in the middle of the project you know where you left off when you pick it up again.  If you have any questions or find any errors please contact me.

Size: Adult Medium (Fits the average-sized lady’s hands)

Materials: Vanna’s Choice Yarn (or other medium worsted weight yarn)  1 ball (3.5 oz/100g/170 yds/156m)  Color shown is #151 Charcoal Grey

Double-Pointed Knitting Needles Sizes US 5 & 7

Cable Needle or extra DPN

Stitch Holder

Stitch Markers

Yarn Needle

Gauge: 18 sts = 4” in Stockinette Stitch

Special Stitches:

·         K1, P1 Rib: K1, P1 around

·         C4B: Slip next 2 sts onto CN and hold in back of work, K2, K2 from CN (This creates a right-leaning cable)

·         C4F: Slip next 2 sts onto CN and hold in front of work, K2, K2 from CN (This creates a left-leaning cable)

·         K2tog: Knit 2 sts at the same time (decreases 1 sts)

·         Inc 1: Knit in front and back of stitch (increases 1 st)

Mittens (Make 2)

Cuff: With smaller needles cast on 36 sts.  Divide evenly between 3 DPNs, being careful not to twist sts.  Place marker for beginning of round.  Do K1, P1 Rib until piece measures approx. 3” from beginning.  (It took me 16 rounds to get to this point.)

__  __  __  __  __  __  __  __  __  __  __  __  __  __  __  __

Change to larger needles and begin cable pattern

□ Rnd 1: K around

□ Rnd 2: K around

□ Rnd 3: C4B, K4, C4B, K8, C4B, K4, C4B, K4

□ Rnd 4: K around

□ Rnd 5: K17, inc 1 in next st, K to end of round (37 sts)

□ Rnd 6: K17, place marker, K3, place marker, K to end of rnd

□ Rnd 7: K4, C4F, K4, C4F, K1, slip marker, inc 1 in each of next 2 sts, K1, slip marker, K5, C4F, K4, C4F (5 sts between markers)

□ Rnd 8: K around

□ Rnd 9: K17, slip marker, inc 1 in next st, K2, inc 1 in next st, K1, slip marker, K to end of rnd (7 sts between markers)

□ Rnd 10: K around

□ Rnd 11: C4B, K4, C4B, K5, slip marker, inc 1 in next st, K4, inc 1 in next st, K1, slip marker, K1, C4B, K4, C4B, K4 (9 sts between markers)

□ Rnd 12: K around

□ Rnd 13: K17, slip marker, inc 1 in next st, K6, inc 1 in next st, K1, slip marker, K to end of rnd (11 sts between markers)

□ Rnd 14: K around

□ Rnd 15: K4, C4F, K4, C4F, K1, slip marker, inc 1 in next st, K8, inc 1 in next st, K1, slip marker, K5, C4F, K4, C4F (13 sts between markers)

□ Rnd 16: K around

□ Rnd 17: K17, slip marker, inc 1 in next st, K10, inc 1 in next st, K1, slip marker, K to end of rnd (15 sts between markers)

□ Rnd 18: K to 1^st marker, remove marker, K1, slip next 13 sts to a stitch holder, K1, remove marker, K to end

□ Rnd 19: C4B, K4, C4B, K8, C4B, K4 C4B, K4

□ Rnd 20: K around

□ Rnd 21: K around

□ Rnd 22: K around

□ Rnd 23: K4, C4F, K4, C4F, K8, C4F, K4, C4F

□ Rnd 24: K around

□ Rnd 25: K around

□ Rnd 26: K around

□ Rnd 27: C4B, K4, C4B, K8, C4B, K4, C4B, K4

□ Rnd 28: K around

□ Rnd 29: K around

□ Rnd 30: K around

□ Rnd 31: K4, C4F, K4, C4F, K8, C4F, K4, C4F

□ Rnd 32: K around

□ Rnd 33: K around

□ Rnd 34: K around

□ Rnd 35: C4B, K4, C4B, K8, C4B, K4, C4B, K4

□ Rnd 36: K around

□ Rnd 37: K around

□ Rnd 38: K around

□ Begin shaping top of mitten ~ Rnd 39: *K4, K2tog; repeat from * around. (30 sts)

□ Rnd 40: K around

□ Rnd 41: *K3, K2tog; repeat from * around. (24 sts)

□ Rnd 42: K around

□ Rnd 43: *K2, K2tog; repeat from * around. (18 sts)

□ Rnd 44: K around

□ Rnd 45: *K1, K2tog; repeat from * around. (12 sts)

□ Rnd 46: K around

□ Rnd 47: K2tog around. (6 sts)

Cut yarn, leaving a 5 or 6” tail.  Draw tail through remaining sts and pull tightly to secure.  Fasten off and weave in ends.

Thumb: Divide sts from holder evenly onto 3 DPNs (larger needles), From right side, join yarn to mitten.  Pick up & K 3 sts along top of thumb hole, then K remaining sts. (16 sts)  Place marker for beginning of round.

Next Rnd: K2tog, K2 tog, K to end of rnd (14 sts)

Next Rnds: K around until thumb measures approx 2 ¼” from join. (It took me 10 rounds to get to this point).

__  __  __  __  __  __  __  __  __  __

Next Rnd: K2tog around – 7 sts remain.  Cut yarn, leaving a 5-6” tail.  Draw tail through remaining sts and pull tightly to secure.  Fasten off  and weave in ends.